ApexCore Technical Services L.L.C.
Licensed Dubai contractor

Specialist Interior Finishing in Dubai and the UAE

Walls, ceilings and surfaces finished in wood, stone, plaster, acoustic and decorative panel systems — installed under direct supervision, with the licensed technical capability to complete the surrounding works.

Discuss Your Finishing Project →Request a Site Assessment →
Licensed Dubai contractorCommercial License No. 1596298 · DET Dubai
Direct supervisionEvery scope coordinated on site under our supervision
Substrate to finishPreparation, installation and finishing under one scope
Finishing Solutions

Finishing solutions, from substrate to final surface

Not one material, but the right system for each surface — planned, prepared and installed as a single scope.

Curved timber slat wall with a palm plant in front

Interior Wall Systems

Decorative and acoustic wall panels, feature walls, corners and trims.

Bedroom with a layered ceiling and warm cove lighting

Ceiling Systems

Decorative and acoustic ceilings and false ceilings with coordinated lighting.

Meeting room with a full-height vertical timber-slat wall

Acoustic Panel Systems

Slatted and felt-backed acoustic panels for walls and ceilings.

Travertine-clad bathroom with a freestanding bath

Stone, Tile & Plaster Finishes

Floor and wall tiling, stone and porcelain surfaces, plaster and mouldings.

Living room with a warm, textured plaster wall

Wallcoverings & Paint

Wallpaper, textile wallcoverings, painting and decorative coatings.

Walnut built-in joinery with integrated linear lighting

Custom Joinery & Built-ins

Bespoke joinery and built-in elements, produced to your design and installed under our supervision.

Timber slat ceiling with recessed linear light fittings

Integrated Lighting

LED and profile lighting coordinated with the finish layout.

Modern house with timber cladding and soffits

Exterior Decorative Cladding

Decorative exterior panels on a sub-frame, installed to the manufacturer's specification.

Featured system
Approved WoodUpp Installation Partner

WoodUpp acoustic and decorative panels

We supply and install WoodUpp systems in villas, apartments and commercial interiors — from substrate preparation and framing to trims, transitions and integrated lighting.

  • Acoustic slat walls and ceilings
  • Decorative wall panels and feature walls
  • Sub-frame and substrate preparation to the manufacturer's specification
  • Precise trimming, corners and transitions

ApexCore is an Approved WoodUpp Installation Partner and a WoodUpp Pro trade partner, and an independent contractor; systems are installed to the manufacturer's requirements.

See all systems we install
Ask about WoodUpp installation
Materials

Materials we work with

  • Wood
  • Composite panels
  • MDF
  • Veneer
  • Acoustic felt
  • Stone
  • Porcelain
  • Tile
  • Plaster
  • Gypsum
  • Mouldings
  • Wallcoverings
  • Textile
  • Paint
Projects

Finished work

All projects
Framed slatted wall panel above a staircase, with slatted cladding and concealed lighting along the stair

Slatted wall panels and LED lighting - private villa

WoodUpp Akupanel wall panels with Lumi LED lighting · Yas Island, Abu Dhabi

Supply and installation of WoodUpp Akupanel slatted wall panels and integration of WoodUpp Lumi LED lighting in a private villa.

View project
Two-storey villa façade with dark slatted Aluwood cladding framing the upper glazing and the covered terrace below

Aluwood exterior façade - private villa

WoodUpp Aluwood exterior panels · Jumeirah Park, Dubai

Installation of WoodUpp Aluwood outdoor façade panels in Brown across multiple wall sections of a private villa, with outer corner profiles, cutting and jointing to suit the wall geometry.

View project
Living-room wall with a tall slatted acoustic panel, an LED strip along its edge and a wall-mounted television

Acoustic slat panels and LED strip - apartment

WoodUpp Akupanel acoustic panels with Lumi LED lighting · Palm Jumeirah, Dubai

Supply and installation of four WoodUpp Akupanel acoustic panels, including cutting to height and electrical cut-outs, and installation of one WoodUpp Lumi LED light strip.

View project
Floor-to-ceiling room divider with two bowl lights, shelves and two boxes, fixed between floor and ceiling next to a kitchen and dining table

Embrace room divider and entrance porch - villa

WoodUpp Embrace room divider with a custom base · Emaar South, Dubai

Supply, assembly and on-site installation of a WoodUpp Embrace floor-to-ceiling room divider on a custom plywood compensation base with a Spanish Oak laminate finish; assembly and installation of an entrance trellis panel with decorative artificial greenery; entrance porch tiling; assembly and installation of an outdoor storage cabinet.

View project
Beyond finishing

Complete scope under one licence

Finishing rarely stands alone. The surrounding works are covered by Commercial License No. 1596298, so one contractor can coordinate the whole scope.

  • Painting Contracting
  • Plaster Works
  • Carpentry & Wood Flooring Works
  • False Ceiling & Light Partitions Installation
  • Electrical Fittings & Fixtures Services
  • Floor and wall Tiling Works
  • Wall Paper Fixing
  • View all licensed services
Process

How a finishing project runs

  1. Site assessment

    We review the space, the substrate and your design intent.

  2. Measurements & substrate check

    Dimensions, levels and the base are verified before installation.

  3. Installation

    Sub-frame, panels and finishes installed under direct supervision.

  4. Finishing & handover

    Trims, transitions and details completed, then inspected together.

Discuss your project

Discuss Your Finishing Project

Share the location, the surfaces and any drawings or photos. We will confirm whether the scope fits our licence and advise the next step.

Site assessments are chargeable; the fee is credited against the project if you proceed with ApexCore. Terms are confirmed in writing before the visit.

Discuss Your Finishing Project →Request a Site Assessment →